Free Shipping over $99! 
Amaircare 7500 BiHEPA Air Filtration System
Amaircare 7500 Description
The Amaircare 7500 is a large central HEPA air filtration system which can be installed as a stand alone system or into your current furnace ducting. This model is available in a standard configuration or as a VOC unit for tackling chemicals, gases and odors. This air purifier contains two large HEPA filters and either two carbon foam inner filters or two activated carbon canisters. The Amaircare 7500 moves over 800 CFM and is recommended for offices, homes and condos up to 3000 sq. ft.
| Model Options | HEPA Filter | Carbon Filter |
|---|---|---|
| Amaircare 7500 | Two 100 sq. ft. HEPA filters | Two non-woven polyester carbon coated post-filters |
| Amaircare 7500 VOC | Two 100 sq. ft. HEPA filters | Two 3.5 lb activated carbon canisters (7 lbs total) |
Some Common Installations
Below are some common installation methods for the Amaircare 7500 BiHEPA air filtration system.
Amaircare 7500 Specifications
| Filter Details | |
|---|---|
| Pre-Filter | Foam pre-filters (washable) |
| HEPA Filter | Dual true medical grade HEPA filters |
| HEPA Surface Area | 200 sq. ft. (Two 100 sq. ft. HEPA filters installed) |
| Carbon Filter | Non-woven polyester carbon coated post-filters/Granulated carbon canisters optional |
| Carbon Weight | 7 lbs with optional carbon canisters (Two 3.5 lb canisters) |
| Carbon Surface Area | 874 acres with optional carbon canisters |
| UV Light | Not available |
| Filter Life Monitor | Not available |
| Operational Details | |
|---|---|
| Delivered Air Flow | 800 CFM (est.) |
| Coverage (3-6 Air changes/hour) | 1000 - 2000 sq/ft |
| Intake | 14" round duct collar (on Top) |
| Outflow | Two 8" round duct collars on side (knockouts on both left and right sides) |
| Fan Control | Variable speed control |
| Noise Level | Not Available |
| Remote Control | Not Available |
| Programmable Timer | Not Available |
| Ozone Emissions | None |
| Manufacturing Details | |
|---|---|
| Size | 32" high X 17" wide X 28" long |
| Weight | 82 lbs |
| Maneuverability | Permanent Installation |
| Materials and Finish | 18 gauge steel housing, durable baked thermoset powder finish |
| Available Colors | Meteorite |
| Filter Access | Front of unit |
| Other Details | |
|---|---|
| Electrical Requirments | 120 VAC (includes grounded 8 foot long 3 conductor 18 gauge cord) |
| Power Consumption | 400 Watts |
| Approvals | CSA and UL approved |
| Country of Manufacture | Canada |
| Warranty | 5 Years Limited |
Amaircare 7500 Filters And Maintenance
The Amaircare 7500 comes with the following filters installed and ready for use. Below is some information on filter life expectancy and replacement costs.
| Filter | Life | Cost |
|---|---|---|
| Pre-Filter | Replace every 6-12 months | $86 |
| HEPA Filter | Replace every 3-5 years | $440 |
| Carbon Filter | Replace every 2-3 years | $210/$420 (VOC model) |
| Total Filter Replacement Cost | $736/$946 (VOC model) | |
Room Coverage Based On Air Changes/Hour (ACH) And Fan Speed
The table below shows estimated room coverage in square feet for the Amaircare 7500. When selecting an air purifier keep in mind that fan speed and noise go hand in hand and it may not be possible to operate at high speed in some environments. When it comes to air changes per hour, HEPA filters are more effective at higher ACH ratings and carbon filters are more effective at lower ACH ratings. AirFresh Solutions recommends 3-6 ACH for most common applications.
| ACH* | High Fan Speed | Low Fan Speed |
|---|---|---|
| 1 ACH | 6000 sq/ft | 2000 sq/ft |
| 2 ACH | 3000 sq/ft | 1000 sq/ft |
| 3 ACH | 2000 sq/ft | 666 sq/ft |
| 4 ACH | 1500 sq/ft | 500 sq/ft |
| 5 ACH | 1200 sq/ft | 400 sq/ft |
| 6 ACH | 1000 sq/ft | 333 sq/ft |
| 7 ACH | 857 sq/ft | 285 sq/ft |
| 8 ACH | 750 sq/ft | 250 sq/ft |
| 9 ACH | 666 sq/ft | 222 sq/ft |
| 10 ACH | 600 sq/ft | 200 sq/ft |